Routine Inspection - Medline MDS86410TRIG Guide D'assemblage

Maintenance:
Clean the grips with a mild soap detergent or household cleaner. Do not use an organic
solvent such as acetone, MEK, lacquer thinner, lighter fluid, dry cleaning fluid, gasoline or
turpentine, that may dissolve the plastic and cause the grip to loosen. Thoroughly dry the
product IMMEDIATELY with a towel.

Routine Inspection:

Prior to each use, ensure;
1. Walker is adjusted to the correct height
2. Walker sits level and all legs are adjusted to an equal height.
3. There is no frame damage
4. Locking mechanisms and spring buttons are fully engaged.
5. The walker does not have any loose hardware or components.
6. No components of the walker are missing.
7. No rust or corrosion is present on the walker
8. Locking mechanisms and spring buttons are fully engaged
9. Tips and wheels are in good condition. Replace tips immediately if worn or missing.
10. Glide brakes are functional and able to engage.
Do not use the walker if there are any issues with the above.