Memory Mode; Overload; Battery Life - Vigor Equipment V2795 Mode D'emploi

Operating Instructions

6. Memory Mode

Step 1. P ress "M" button to enter memory mode.
Step 2. Press "UP" or "Down" for searching memorized value.
Step 3. P ress "M" button to exit memory mode.

7. Overload

When angle measurement is over maximum value 999°, the value will stop
accumulating angle measurement and LCD will display "FULL". Press "C"
to clear reading value.

8. Battery Life

Battery Type:
Operation mode:
Standby mode:
9. EC-Declaration of Conformity
Product designation:
Article No.:
We confirm hereby that the product as described above has been
manufactured in full conformity with the basic requirements which are
defined in the European EMC Directive (2004/108/EC). Furthermore we
declare,that following standards are applied :
EN 61000-6-3 :2007+A1 :2011
EN 61000-6-1 :2007
IEC 61000-4-2 :2008
IEC 61000-4-8 :2009
Person authorised to compile the technical file: Sandra Müller, Tel.: +49 (0) 2191 792 319
Date: 14.01.2013
Hermann J. ZERVER
ViGOR GmbH • Am Langen Siepen 13 - 15 • 42857 Remscheid • GERMANY
info@vigor-equipment.com • www.vigor-equipment.com
AAA*2
60 hr
1 year
Electronic Angle Gauge
ViGOR V2795
CISPR16-2-3:2010+A1 :2010
IEC 61000-4-3 :2006+A1 :2007+A2 :2010
11