Aosom B71-057 Manuel Du Propriétaire page 6

Safety Pin
WARNING:Do not use the trailer without proper installation of the safety pin.
Installing the Wheels
Steps:
1. Turn the unit on it's back.
2. Slide each Wheel Shaft (A) into the Trailer Axle (B).
3. Press the Lock Button (C) until the Wheel locks into position and cannot be
pulled out. .
4. Repeat for opposite side.NOTE: To remove the Wheel, push in the Lock Button
and pull the Wheel out of the Axle.
WARNING:
For easy towing and safe handling, check tires often for proper inflation and
Ÿ
wear. Check tire pressure regularly and inflate tires to within the range shown on
the tire sidewall.
Failure to properly install wheels could allow them to come off during use. This
Ÿ
could lead to serious injury.
Installing the Pull Bar and Front Wheel
Steps: see the picture as blow
Hitch Arm
5
EN