Smoke hollow CG600S Manuel page 12

Assembly
Step 13
12
13
Assembly
Step 14
14
Fig. 14B
12
Fig. 12
Smoke Stack Caps
Fig. 12
Right side shelf assembly shown here.
Repeat procedure to assemble Left side shelf.
Fig. 13
Step 15
Fig. 14A
Fig. 14
Step 14:
Insert the rod of the charcoal tray lift assembly through the hole in the left
side of the firebox assembly.
Attach the charcoal tray lift assembly to the panel in the rear of the firebox
assembly using (4) M6x15 screws as shown in
curely inside the Lid as shown in Fig
Step 13: Assemble Smoke St
Caps
Screw the smoke stack caps into the smoke
Locate : (2) Smoke Stack Caps
stacks in a clockwise motion. The smoke
stack cap is adjustable to allow more or less
Procedure: Refer to Fig. 13, screw
clockwise the Smoke Stack Caps in
the Smoke Stacks. The smoke stac
cap is adjustable to allow more (a
clockwise) or less (clockwise) sm
to exit the grill.
Note: Always wear protective glov
Fig. 13
or mitts when turn the smoke stack
caps while in use.
Step 14: Assemble Side Shelve
Locate: (2) Side Shelves and (8) M6
bolts
Procedure: Refer to Fig. 14, attach
Side Shelves to the each Legs usin
M6x52 bolts.
Charcoal Tray Lift
Assembly
11
(Fig.14A)
Step 12:
(Fig.12)
smoke to exit the grill.
Step 13:
Attach both folding side
shelves to the legs using (8)
(Fig.13)
M6 shoulder bolts.
Side shelf also folds
to down position.
Fig. 15A
(Fig. 14B)