LEGRAND Wattstopper LMSH-CR Guide Rapide

No: 29434 – 04/21 rev. 2
Catalog Number • Numéro de Catalogue • Número de Catálogo: LMSH-CR
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
The LMSH-CR Shade Configuration Tool is a handheld tool for setup and testing of Legrand Shading Digital Lighting Management (DLM)
based shading devices. It provides wireless access to shade motors, switches, and shade controllers for setup and parameter changes
outside of the automatic Plug and Go (PnG) process for initial shade room setup. The LMSH-CR displays menus and prompts to lead
you through each process. The navigation pad provides a familiar way to navigate through the customization fields. The LMSH-CR allows
modification of the system without requiring ladders or tools and can be done simply with a touch of a few buttons.
Upon initial shade room start-up, PnG will automatically configure all connected shade motors to all installed switches for default operation
depending on the type of shade fabric and the type of installed switches. During testing, the factory will assign a value in the shade motor
indicating the opacity of the installed shade fabric. This will be used to determine the shade button assignments. The PnG will also set a
default shade upper and lower limit which can be adjusted using the Pull and Save (PnS) procedure (see installation instructions). Lastly, all
shades are assigned to all shade switch button upon start-up. By using the Push n' Learn (PnL) process (see installation instructions), installer
can assign individual buttons to control one or more specific shades. The functions setup by the PnS and PnL processes can also be done
using the LMSH-CR.
The LMSH-CR's IR transceiver allows bidirectional communication between DLM-based shade devices and the LMSH-CR. Simple menu
screens allow you to view the current status of the system and make changes. The LMSH-CR can change motor parameters like roll
direction, shade speed, and any of the shade upper and lower limits. It can also change shade groupings, switch assignments, and shade
switch functionality.
For a detailed explanation of all the screens in the LMSH-CR, see the LMSH-CR User Guide, which can be downloaded from the Legrand
Commercial Shading website.
The LMSH-CR has a micro-USB port (found in the battery compartment when you remove the battery cover). This port is used to update the
firmware in the LMSH-CR, when updates are made available. Details on updating can be found in the LMSH-CR User Guide.
BATTERIES
The LMSH-CR operates on
three standard 1.5V AAA Alkaline
batteries or three rechargeable
AAA NiMH batteries.
The battery status displays in
the upper right corner of the
display. Three bars next to BAT=
indicates a full battery charge. A
warning appears on the display
when the battery level falls below
a minimum acceptable level.
To conserve battery power, the
LMSH-CR automatically shuts
off 10 minutes after the last key
press.
All manuals and user guides at all-guides.com
Wattstopper
DLM Wireless IR Shade Configuration Tool
Outil de commande IR sans fil DLM pour stores
Herramienta de puesta en servicio inalámbrica por infrarrojos DLM para stores
Quick Start Guide • Guide de démarrage rapide • Guía de inicio rápido
DESCRIPTION AND OPERATION
You navigate from one field
to another using
or (down) arrow keys.

The active field is indicated
by flashing (alternates
between yellow text on black
background and black text
on yellow background).
Once active, use the Select
button to move to a menu
or function within the active
field.
Value fields are used to
adjust parameter settings. They are shown in "less-than/greater-
than" symbols: <value>. Once active, change them using
(right) arrow keys. The

increments a value. Selections wrap-around if you continue to press
the key beyond maximum or minimum values. Moving away from the
value field (using
(Home) button takes you to the main menu. The
can be thought of as an undo function. It takes you back one screen.
Changes that were in process prior to pressing the
Home Menu
The Home (or Main) menu displays after the powerup process
completes. It contains information on the battery status and six menu
choices. Press up/down buttons to locate the desired function then
press Select.
®
NAVIGATION
(up)

Power
On/Off
Select
Back
Left
Down
left key decrements and the

/ keys) overwrites the original value. The
 
IR Window
BAT=
Shade Config (PnS)
MCA Config
Button Config
Utilities
More
Home/
Main Menu
Up
Right/Next
(left) and

right key

(Back) button
button are lost.