Adjusting Monitor Controls - NEC MITSUBISHI SpectraView Mode D'emploi

Adjusting Monitor Controls

PC VERSION
Figure 5
Once a monitor is calibrated the On Screen Manager (OSM) is disabled from the
monitor's front panel controls. The reason for this is that any adjustments made
manually to the monitor's color controls can compromise the calibration that has
been done to the monitor.
If the monitor's image geometry needs to be adjusted these controls are
available in the "Monitor" menu.
Enter the "Monitor" menu from the main software menu.
Move the slider bars to the desired setting.
To reset the menu to the settings before any of the adjustments were made click
"Restore" or "HW Reset" to set these controls to their factory default.
Click "Done" when finished to return to the main menu.
25