NEC MITSUBISHI SpectraView Mode D'emploi page 23

Creating a Custom Preset
–continued
PC VERSION
Figure 4b
Enter a name for the new preset in the "Preset Name" menu box (Figure 4b).
Adjust the "Color Temperature" control to the desired setting.
Adjust the "Gamma" control to the desired setting.
Luminance is the value of the brightness of full white and may have a value
specified in candelas/meter-squared (cd/m 2 ) or may be set to "Max" . The Max
value is the brightest that the monitor can be adjusted using factory-specified
limits for the red, green, and blue controls. To request the maximum brightness
for a calibration click the "Maximum" check box.
Once the desired changes have been made to these controls click "Save" to create
this setting as a calibration option.
To delete a preset, select the setting in the "Preset Name" menu box and click
"Delete" .
23