Silver Cross Motion Mode D'emploi page 15

DO NOT LEAVE UNSECURED
LUGGAGE OR OBJECTS ON THE
PARCEL SHELF IN THE VEHICLE,
BECAUSE IN THE EVENT OF
AN ACCIDENT THEY COULD
CAUSE SERIOUS INJURY TO THE
OCCUPANTS.
ON
COVER THE SEAT IF IT IS LEFT IN
DIRECT SUNLIGHT. PLASTIC AND
IAL
METAL SURFACES GET VERY HOT
AND COULD BURN. THE CAR SEAT
ED
COVER IS ALSO LIKELY TO FADE.
T
DO NOT PLACE THE FRONT SUPPORT
HE
LEG ON A FLOOR STORAGE
COMPARTMENT LID. THE FRONT
SUPPORT LEG MUST MAKE FULL AND
FIRM CONTACT WITH THE VEHICLE
FLOOR.
CT
IM-JTP-190816-02r01-MOTION-car-seat-IM ROW.indd 15
MAINTENANCE
FITTING / REMOVING THE COVER
There are 2 fastening points for the cover
on the front. Unfasten these points and
gently pull the front part of the cover.
There are plastic parts on the sides of the
cover used to fasten it in place. Simply
cover back on, follow the same steps in
reverse. Insert the side parts in the slot.
CLEANING
The seat cover is easily removable and
should be washed on a delicate cycle at
30 degrees using a mild detergent.
Take out all removeable internal plastic /
foam parts from inside any fabrics before
washing.
ENG
FRA
SPA
ITA
DEU
SWE
FIN
RUS
KOR
silvercrossbaby.com
09/09/2020 16:59
15