Silver Cross Motion Mode D'emploi page 11

LOADING POSITION
2.4
Press the button (8) again to place
the seat in the forward facing position.
It is important to check that the seat is
STRAPPING THE CHILD INTO
THE SEAT
THIS CHILD RESTRAINT SYSTEM HAS A
LOADING POSITION MAKING IT EASY
TO PLACE THE CHILD IN THE SEAT AND
ADJUST THE STRAPS TO FIT CORRECTLY.
3.1
Turn the seat to the loading position
(2.2) and open the harness (5). Move the
harness straps to the sides to place the
child in the seat.
IM-JTP-190816-02r01-MOTION-car-seat-IM ROW.indd 11
3.2
Place the straps over the child and
fasten the buckle.
3.3 To adjust the headrest (2) pull the
lever handle (1) on the top. It should be
set to the right position, this means that
the shoulder harness should come out
approximately 1 cm above the child's
shoulders.
3.4
Tighten the harness by pulling the
3.6
Once the child is securely strapped
in, you can recline the seat by pressing
the button (7) to the required position.
ENG
FRA
SPA
ITA
DEU
SWE
FIN
RUS
KOR
silvercrossbaby.com
09/09/2020 16:59
11