Parts List - Eagle Group DHT Serie Manuel D'utilisation Et Instructions

ASSEMBLY INSTRUCTIONS
Figure 1
PARTS LISTS
DHT Series
HT_OB and HT_CB Series
3
Push Handle (for all units with casters)
1. Determine which end the handle is to be attached.
2. Remove the existing screws from the end panel.
3. On the handle, remove the self-adhesive strip of black
vinyl held in place for shipping by a static charge.
Remove strip to expose countersunk screw holes (see
Figure 1).
4. Using the provided 10-32x1-3/4˝ flat-head screws,
attach handle securely (see Figure 1).
5. Remove the paper backing from the vinyl strip and
apply to handle, covering all screw holes.

Parts List

# part # description
#1 301681 knob
#2 383991 120V control replacement kit
#2 383989 208V control replacement kit
#2 383990 240V control replacement kit
#3 302055 indicator light
#4 303163 120V heating element
#4 303173 208V heating element
#4 303174 240V heating element
#5 310907 wrapper bowl assembly
Replacement parts may be purchased through our
local Authorized Parts & Service Center.
Parts List
# part # description
#1 301986 knob
#2 301959 thermostatic control
#3 309715 switch 20A
#3 309716 switch 30A
#3 Consult factory for 3-Phase switch
#4 307547 main indicator light
#5 302353 indicator light
#6 309420 120V heating element
#6 303173 208V heating element
#6 303174 240V heating element
#7 310904 wrapper bowl assembly
Replacement parts may be purchased through our
local Authorized Parts & Service Center.