Plastimo ECHOFISH 820 Manuel D'installation Et D'utilisation page 38

2) Use the Up/Down Arrow to select Units option.
3) Press Right Arrow to enter into Units setting.
4) Use the Up/Down Arrow to select the Temperature option.
5) Press Right Arrow to enter into the setting.
6) Press Up/Down Arrow to change the option.
7) Press ENT to confirm the setting.
8) Press EXIT to exit the menu setting.
20. Depth unit
Feet and Meter are available for the depth measure:
To set the Depth:
1) Press MENU to enter into menu setting.
2) Use the Up/Down Arrow to select Units option.
3) Press Right Arrow to enter into Units setting.
4) Use the Up/Down Arrow to select the Depth option.
5) Press Right Arrow to enter into the setting.
6) Press Up/Down Arrow to change the option.
7) Press ENT to confirm the setting.
8) Press EXIT to exit the menu setting.
21. Fish ID Alarm
Fish ID. is used to set whether the Fishfinder sounds an
Echofish 820 – Installation & Operation manual
38