Brandson Equipment 303846 Mode D'emploi page 23

• Dust and lint deposits which get into
the appliance are a common cause
of overheating. Make sure that these
deposits are removed regularly by dis-
connecting the heater from the sock-
et, so that it can cool down and be
cleaned (as described in the section
on "Cleaning and care").
• Connect the appliance only to a suita-
ble socket. Do not connect the heater
to extension cables, surge protectors,
timers, direct switches or electri-
cal sockets when other devices are
plugged into the same socket. The ap-
pliance should not be used with cable
extension sets, power strips or adapt-
ers. Non-compliance could result in
fire, overheating, malfunction, prop-
erty damage, injury or even death!
• Do not use the appliance outdoors!
• This heater has to be connected to a
English
23