Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8548745
7.
Turn off the product by rotating the Main Control Knob to the "0" position, and then unplug
the product from the electrical outlet.
NOTE: Do not force knob beyond its normal stop position.
MAINTENANCE
1.
Unplug the unit and let it cool completely.
2.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use
a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
3.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean
the heater. This may cause damage or deterioration to the surface of the heater.
4.
DO NOT immerse the heater in water.
5.
Wait until the unit is completely dry before use.
Storage
Store the heater in a cool, dry location when not in use. Preferably, to prevent dust and dirt build-up,
use the old packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
1.
Check if the power cord is plugged into an electrical outlet, if not, plug in.
2.
Check if electricity to the main fuse is working.
3.
Confirm that the Power Knob is turned to"1"or "2"
4.
Check your thermostat setting. The heater may be off because it has reached the desired
temperature setting.
5.
Check if the heater is on a level surface. If the tip-over safety switch is not pushed in, the
heater will not run.
Visit www.princessauto.com for more information
Quartz Tower Heater
V 3.04
5
Publicité
Table des Matières
