Stopping Playback - Esoteric SA-60 Manuel Du Propriétaire

1
1 Press the STANDBY/ON button to turn the unit on.
The ring surrounding the button is red in the standby mode. It
turns blue when the unit is turned on.
2
Press the OPEN/CLOSE button (L) to open the tray.
3
Insert the disc label side up.
< In the case of double-sided discs, the side to be played should
be face down.
< Make sure the disc is centered in the tray in order to avoid
any malfunction or jamming of the tray or damage to the
disc.
4
Press the OPEN/CLOSE button (L) again to close the
tray.
The tray will close. Take care that you don't catch your fingers
in the tray.
The unit reads the disc (this may take a little time).
Some discs may automatically start playback.
5 Press the PLAY button to start playback if playback has
not started automatically.
As the SA-60 has no video output terminals, you cannot see
an on-screen menu of a DVD video disc.
Playback of some DVD video discs may be difficult depending
on DVD authoring.
14
3 2 4
5
Playback
Pausing playback
Press the PAUSE button to pause audio playback.
Press PLAY or PAUSE to restart playback.
< Caution - do not leave player in the "pause" mode for
extended periods of time. Damage to the player may occur.

Stopping playback

During playback, press the STOP button to stop playback.
< When the STOP button is pressed with a video DVD, playback
is stopped, and the display shows "RESUME". Pressing PLAY
continues playback.
Pressing any of the following buttons cancels resume mode:
STOP in the stop mode, OPEN/CLOSE
Opening and closing the tray
Pressing OPEN/CLOSE opens the tray if it is closed, and closes
it if it is open. When the tray is opened during playback, it
may take a few seconds before the disc is "unloaded" and
the tray opens.