Disposing Of The Unit - Power Fist 8549743 Manuel D'utilisateur

Appareil de chauffage pour laiterie

Table des Matières

Les langues disponibles

8549743

WARNING! Always unplug the product when it will be left unattended or not in use.

MAINTENANCE

WARNING! Do not attempt to disassemble this product for any reason, as incorrect re-assembly

could cause a risk of fire or electric shock. Only qualified service personnel should perform

any servicing.

WARNING! Always unplug the product from the electrical outlet and allow it to cool before cleaning

or storing it.

NOTE: This product is permanently lubricated at the factory before shipping and will not require further

lubrication for the life of the product.

Clean the exterior surface by wiping with a soft, damp cloth, and allow the product to dry

completely before storing or using. Dust can be removed from vents using a small vacuum.

To store, wind and secure the power cord using a twist tie or rubber band, and place the

product in a cool, dry location.

WARNING! Do not allow water or other liquids to enter the interior of the product. Do not use

abrasive cleaners/pads to clean the product.

STORAGE

Store the heater in a cool, dry location when not in use and after it has cooled off. Preferably, to prevent

dust and dirt build-up, use the old packaging to repack the unit.

DISPOSING OF THE UNIT

Waste electrical products should not be disposed of with household waste. Please recycle where

facilities exist. Check with your Local Authority or retailer for recycling advice. When scrapping the

heater, follow the regulations concerning the disposal of oil.

TROUBLE SHOOTING

Problem

Your heater shuts off

unexpectedly or fails to operate.

Visit www.princessauto.com for more information

Milkhouse Heater

Possible Cause(s)

1. No electric power.

2. One of the safety features

may have activated to

prevent overheating,

including the tip-over

safety switch and thermal

overload protector.