Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8674285
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended purpose.
2.
Never attempt to exceed the chock's weight capacity (see Specifications).
3.
Use this chock on stable, solid, level ground capable of withstanding the
load. Do not use on a ramp.
4.
Do not leave the chock before locking the wheel cradle in place with the lock pin.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
• Base Assembly
• Wheel Cradle
• Hardware (R-Pin, Cotter Pins, Screws, Spring Washers and Washers)
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
1.
Slide the rectangular rubber sleeves (#4) onto the front legs of the base
assembly (#5). Slide the square rubber sleeves (#16) onto the rear legs of
the base assembly.
4
Motorcycle Wheel Chock
• Post
• Pin Shaft Φ12X65
• Adjustable Support
• Pin Shafts Φ12X100
For technical questions call 1-800-665-8685
V4.0
Publicité
Table des Matières
