AMAZON COMMERCIAL B07RQWVPDT Mode D'emploi page 7

All manuals and user guides at all-guides.com
Step 4: Step 4:
INSTALL STRIKER PLATE INSTALL STRIKE
CENTER
LINE
A. Close door to mark horizontal center line of strike.
•
B. Measure one half of door thickness from door stop to mark
•
vertical center line of strike. Drill 1"(25.4mm) hole,
1/2" (12.7mm) deep at intersection of horizontal and vertical
center lines.
C. Chisel out door jamb 3/32" (2.4mm) deep or until strike plate
•
sits flush with door jamb.
Tighten screws securely.
•
A
C
1"(25.4mm)
HOLE
1/2"(12.7mm)
DEEP
B
DOOR
STOP
7