AMAZON COMMERCIAL B07RQWVPDT Mode D'emploi page 5

All manuals and user guides at all-guides.com
Step 1:
MARK DOOR
Fold the template at the dotted line and tape the template
•
onto the interior side of the door.
Mark hole for the location for the dead bolt and latch.
•
It is recommended that you be at least 38" from
NOTICE
the floor.
Step 2:
DRILL HOLES
Drill a 2-1/18" (54 mm) holes through door face as marked
•
for the dead bolt.
Drill a 1" (25 mm) hole as marked for the latch.
•
DRILL THE 2-1/8" (54mm) HOLE FROM BOTH
NOTICE
SIDES TO AVOID SPLITTING WOOD.
5