CucinaPro 812.150 Manuel D'instructions page 16

micro switch that will allow the rotisserie Grill to be turned on).
5. Set the temperature button to high and turn the time dial to the desired cooking time. The 'Rotisserie
light will illuminate to indicate that the heating element is in the correct position and will start to cook.
The heating element reaches full heat very quickly thus not requiring additional cooking time to
accommodate for this. The rotisserie spit will rotate and your food will begin to cook.
6. Once the desired time of cooking has been reached, the timer will 'ring' and automatically switch off
the Grill. If you are not ready to remove your food just yet you can set the temp switch to low and
re -adjust the timer dial to simply keep your food warm.
7. When you are ready to remove your roast, turn the TIMER control to "Off" and unplug the Grill.
8. ATTENTION! The sides and top of the device are hot. Remove the basket / baking sheet / other parts
with heat resistant gloves. You can also use a cutting fork and pliers.
FOOD BASKET SET UP
To set up your food basket you will need the following components:
Piece A - Loading base
Piece B - Loading rack
Piece D - Rotisserie spit
Piece I - Food basket
1. Place your loading base on a flat surface with the embossed writing facing up. This piece is solely used to
help set up the pieces easily. Position the rotisserie spit into the center of the loading base.
2. Place the food basket onto the loading base so that the open end faces up.
3. Fill your basket with your desired food making sure not to overload it.
4. Take the round basket cover and slide it over the top of the rotisserie spit until it sits in place on top of
the food basket, lock it tightly in place.
5. Your food basket is now ready.
FOOD BASKET OPERATION:
1. Place the drip tray into the base of the rotisserie grill, then place the filter tray on top to catch the
dripping/oils.
2. Place the solid end of the rotisserie spit into the drive socket located at the left hand side within the
appliance. Place the round plastic end of the rotisserie spit onto the spit support located on the inner
right-hand side.
3. Now that your rotisserie spit and chosen food is in position close the glass doors ( Must trigger the micro
switch that will allow the appliance to be turned on).
4. Set the temperature button to high and turn the time dial to the desired cooking time. The 'Rotisserie
light will illuminate to indicate that the heating element is in the correct position and will start to cook.
The heating element reaches full heat very quickly thus not requiring additional cooking time to