Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DE GB NL FR
3.
User MAnUAl
Do not switch on the device if there is a chance the water insi-
de the device is frozen.
The indicator light is "ON" steadily when the device is in operation.
This unit is equipped with a 2-steps power heating element. Therefore the outlet
hot water temperature may vary in connection with inlet water temperature and
flow rate. T o get the desired temperature, adjust the hot water flow rate or add
cold water at your mixer.
Make sure the pressure of your water supply system supersedes the 0,5bar
(0,05MPa).
Temperature and flow rate
Rating power
3.5kW
4.5kW
5.5kW
Note: Parameters in the above diagram are drawn under the following condition:
Voltage Supply: 230V /50Hz
4.
MAintenAnce
Maintenance
Professional maintenance may only be carried out by duly au-
thorised technical staff.
If faulty, never try to repair the hot water device yourself. Please
contact the nearest service specialist or the party that supplied
the appliance originally.
Care
The enclosure can simply be cleaned with a damp cloth. Do not use aggressive
cleaners or cleaners with a scouring effect!
18
Flow rate (Δt)
2.0L/min
+25.0°C
+32.1°C
+39.3°C
2.5L/min
+20.0°C
+25.7°C
+31.4°C
3.0L/min
+16.7°C
+21.4°C
+26.2°C
Publicité
Table des Matières
