Volume Control; Listening To The Radio; Bluetooth Operation - Roadstar HRA-1350US/BT Manuel D'instructions

1 English
FUNCTION
FM
BLUETOOTH
USB/SD
AUX-IN
LOCATION OF CONTROLS
1. SPEAKERS
2. DIAL SCALE
3. DIAL POINTER
4. TUNING KNOB
5. VOLUME KNOB
6. FUNCTION BUTTON
7. PLAY/PAUSE BUTTON
8. FUNCTION LED
9. SKIP+ BUTTON
10. SKIP- BUTTON
11. FM ANTENNA
12. SD SOCKET
13. USB SOCKET
14. AUXILIARY INPUT
15. ON/OFF SWITCH
16. AC CORD
CONNECTING TO POWER
This unit operates from a main supply of 230V ~ 50Hz. Connect the AC power cord to the AC house-
hold main outlet. Ensure that the voltage is as indicated on the rating plate on the rear of the unit.
Switch ON/OFF SWITCH (15) to ON position to turn the unit ON. Switch ON/OFF SWITCH (15) to OFF
position to switch the unit OFF.

VOLUME CONTROL

Turn the VOLUME KNOB (5) to the desired volume level.

LISTENING TO THE RADIO

1. Press FUNCTION BUTTON (6) repeatedly to select FM (RED) mode.
2. Turn TUNING KNOB (4) to select your favourite radio station.
3. For FM reception there is a built in telescopic antenna (11). You may need to adjust the position of
the antenna to get optimum reception.

BLUETOOTH OPERATION

1. Press FUNCTION BUTTON (6) repeatedly to select BLUETOOTH (BLUE) mode. The FUNCTION
LED (8) will start blinking.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tagged as HRA-1350US/
BT, then confirm connection.
3. When the pairing is successful the FUNCTION LED (8) will stop blinking.
4. Now you can transfer the music to the HRA-1350US/BT and all operations can only be operated
from your mobile device.
AUX-IN
1. This unit provides an auxiliary audio input jack for connecting external audio device like MP3
players, CD players and allow playback of your external source through the system speakers.
LED (8) COLOUR
RED
BLUE
GREEN
ORANGE