Sammic MO-1000 Mode D'emploi page 16

EN ES
Programming Mode
11.
This mode allows the user to assign cook times and power levels
to the once touch button.
1) Open the door and press "1" for 5 seconds, the buzzer will
sound once and enter to Programming Mode.
2) "ProG" displays.
3) Press any number, 0 to 9, and the LED will display the saved
time, then you can input the time you need.
4) Press " ", "
level.
LED will display the related power. If the same button pressed
twice, the power will change to PL10. If no power chosen,
"PL10" is default.
5) To change the cooking factors: If press "X2",LED will display
"CF:XX". The default factor is 80%. "CF:80" displays. If you
need to change the cooking power, just press one of the num-
ber buttons to set.
6) After setting the time and power, press "
king program will be saved.
When the program saved, "ProG" displays.
7) If all the cooking time exceeds the MAX.time User Option 7,
when press " " to save the program, the buzzer will sound
three times briefly to tell you the time is no use. And then LED
turn back to show "ProG". The time set before will be no
change.
8) Close the door, the oven will turn back to Ready Mode.
If press " " button during setting process, the oven turn to
Door Open Mode.
The program that not saved will be lost. If there is program
saved as memory procedure, press the related number button,
the saved program will start. If no saved program, the buzzer
will alarm when pressing number button and it will not work.
For example: set the program as memory cooking.
Program; Power level PL7 and cooking time is 1 minute and 25
seconds.
Step 1: In ready state, press number button "1" for 5 seconds,
"ProG" displays.
Step 2: Press number button "3", the program will be saved in "3".
Step 3: Press number buttons "1", "2" and "5" to input the cooking
time.
Step 4: Press " " button, "PL7" displays. Setting finished.
Step 5: Press " " to save. When use the program next time,
just press "3", the related program will start.
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset, just repeat the above steps.
3. If press " " at the last step, it will turn back to Ready Mode.
The setting will be no use.
Double Quantity cooking
12.
1) Under ready state, press "X2" button and then press number
buttons 0-9 in 5 seconds, the oven will start cooking with the
quantity preset cooking time.
", " " or " " to input the power
" in 30s, the coo-
2) Press "X2", "doub" displays. When press number buttons, LED
will display the quantity preset time.
For example, number button "5" and its preset time is 1 minute.
Then press "X2", then time will change to 1:00*(1+0.8)=1:48
3) When cooking program finish, the oven will enter End of Cook
Cycle Mode.
Stage Cooking Programming
13.
This allows the user to cook food items at combination of
various Power Levels.
1) Three stages can be set at most under cooking mode or
memory mode.
After setting the power and time for the first stage, press "
set the second stage. And the same step to set the third stage.
2) When setting the second or the third stage, press "
or "S-3" displays.
3) Press " " button to start cooking.
Example: To set three stages as memory mode. The first stage
is PL7 and time is 1 minute 25 seconds. The second stage is
PL5 and 5 minutes and 40 seconds. The steps are follow.
a. Ready state, press "1" for 5 seconds, LED displays "ProG".
b. Press number buttons "3" to save the program in "3".
c. Press "1", "2", "5" to input the cooking time. "1:25" displays.
d. Press " ", "PL7" displays. The first stage is finished.
e. Press " ", LED displays "S-2".
f. Press "5", "4", "0" button, "5:40" displays.
g. Press " ", "PL5" displays. The second stage is finished.
h. Press " " to save the programm.
Use Option Mode
14.
1) Open the oven door and press "2" for 5 seconds. The buzzer
sounds once and enter this mode.
2) LED displays "OP: - -".
3) Press any number button to enter related mode setting.
For example: to set the voice of the buzzer to medium. Press
"2", "OP:22" displays.
If you want to change, keep pressing "2", LED displays
"OP:20", "OP:21", "OP:22", "OP:23", "OP:20" in cycle.
4) Press " " to save the current setting. After saved, "OP: - -"
display again.
5) During setting process, press "
Close the door will enter Ready Mode.
6) If " " button not pressed at the last step, the program can-
not be saved but stay at previous way.
Service Mode
15.
1) Open the oven door and press "3" for 5 seconds to enter servi-
ce mode.
2) LED displays "SErU".
3) To check the times of closing or opening the door, just press
number button "1", LED will display the times.
4) Press " " and then press number button "4" in 3 seconds,
the message will be cancelled. "4-CL" displays.
16
- 16 -
" to
", "S-2"
" to enter Door Open Mode.