Aqara Hub M2 Mode D'emploi page 8

Trouble adding to HomeKit :
* "Failed to add accessory". Due to multiple adding failures, the error information of iOS cache cannot be removed.
Please restart the iOS device and reset the hub.
* "Accessory already added". After restarting the iOS device and reset the hub, you can manually enter the HomeKit
setup code and add it again.
* "Accessory not found". Please wait for 3 minutes after resetting the hub. You can manually enter the HomeKit setup
code and add it again.
3. Device Operations
1
Add an accessory: after the hub is successfully added, please refer to the accessory
installation guide to add an accessory.
2 Control IR home appliances: please configure the brands and models of the IR home
appliances you need to control in the app according to the app guidelines, and then perform
the corresponding app control and automation control.
4. Restore to Factory Settings
Quick press the button on the hub ten times.
05