auna Kara Illumina Mode D'emploi page 28

EN
28
Connecting the unit to the TV
Connect the supplied RCA cable (white-red-yellow) to the corresponding
coloured connectors on the back of the unit and connect to the respective
video and audio inputs of the same colour on your TV set.
You can also send the audio signal to your stereo system - to do this,
connect the yellow video cable to the TV set and the (red and white) audio
cables to a free (AUX) input on your stereo system.
To display the song texts on the TV screen for a CD+G, you must select the
corresponding input (Video-In) on the TV set. If your TV set does not have
such a video input, you can solve this with an RF modulator available in
specialised shops, which is connected between the antenna cable of the TV
set and the video output of the karaoke system.
Please read the operating instructions of your TV set for further
instructions on connecting external video devices.