Sauder Corner 420474 Instructions De Montage page 32

Step 27
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D28 and D29).
å
Fasten the SLIDES (II and JJ) to the DRAWER SIDES (D28 and D29).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through
holes #1 and #3.
NOTE: The DRAWER SLIDES are marked "DRAWER RIGHT" and
å
"DRAWER LEFT" for easy identifi cation.
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Repeat this step for the small drawers using DRAWER
å
RIGHTS (35DC) and DRAWER LEFTS (35DD).
JJ
2
3
Page 32
Roller end
10A
1
D29
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D28
2
3
3S
420474
10A
Roller end
1
II
www.sauder.com/services