Sauder Corner 420474 Instructions De Montage page 30

Step 25
NOTE: The KEYBOARD SHELF can be attached to the right side, left side, or the
å
center of your desk. If you want your SHELF on the right, fasten the KEYBOARD
UPRIGHTS (Q2) to the SMALL TOP (H2). If you want your SHELF in the center,
fasten the KEYBOARD UPRIGHTS (at an angle) to both TOPS (G2 and H2). The
diagram below is showing the option of the SHELF on the left side.
Fasten the KEYBOARD UPRIGHTS (Q2) to the TOP (G2). Tighten four HIDDEN
å
CONNECTORS and use four BLACK 9/16" LARGE HEAD SCREWS (1S).
BLACK 9/16" LARGE HEAD SCREW
(4 used for the METAL BRACKETS)
Page 30
1S
G2
Q2
How to use the HIDDEN CONNECTOR
To fasten two parts together using the
HIDDEN
screwdriver, at an angle, into the slot in the
HIDDEN CONNECTOR. While pushing the
screw into the hole of the adjoining part,
turn the screwdriver clockwise to tighten.
420474
CONNECTORS, insert
H2
www.sauder.com/services
your