GB
Actuator (SD230)
Dimensions and technical specifikations
Type
HxWxD
[mm]
SD230
81x88x56
Action
Supply voltage
Power consumption
Stroke force
Stroke length
Full stroke time "On" Nominal 3 s
Full stroke time "Off" Nominal 12 s
Protection class
Screw-nut
Cable length
Isolation class
Surrounding temp.
Application area
The electrical actuator in combination
with the valve is used for regulating the heat
supply to the unit. It's function is to open
or close the valve (on/off). The actuator will
open the valve when power is applied.
The electrical actuator can be mounted and
rotated after that the valve has been installed.
For regulating the actuator in combination
with valve complement with SIRe or
appropiate thermostat.
Weight
[kg]
0,2
On/Off-regulation, linear
motion
230V, 50-60 Hz
<1,5 VA in operation
<0,5 VA in the end position
100 N
6,5 mm
IP54
M30x1,5
1,5 m
II
0-60 °C
VOT