Supplied Accessories; Before Operating Your Tv/ Vcr Combination - Sharp 13VT-CR10 Mode D'emploi

Supplied Accessories

Before Operating Your TV/ VCR Combination

Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not
place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other
magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are unable to insert the
plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of
the polarized plug.
Note:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power.
(If the TV set is plugged in, a slight current still flows, even with the POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio
and TV broadcasts are being received. Should such noise appear, turn off either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received due to interference from
the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
• With your thumb nail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries (size "AA"). Be
sure to match the battery e/d terminals with the e/d marks inside the compartment.
02-03 13VT-CR10[E].pm65e
Downloaded from: http://www.usersmanualguide.com/
Infrared Remote Control/Part Number
RRMCG1330PESA
Pull up
3
Size AA
Dry Batteries
Battery
Cover
15/5/01, 7:23 pm
3