Signature Design by Ashley 2160412 Instructions De Montage page 4

4.INSTALL-FLOOR GLIDES BEFORE USE
Your lift chair has four adjust able floor glides. They are located in the owner's package and must be installed before use. These glides can
be adjusted to level your lift chair. See Figure A.
WARNING: Failing to install these floor guides may result in damage to your lift chair, flooring, and may cause the
chair to become unstable and fall over causing personal injury or death
Figure B
5. To install the back, align the female brackets in the back with the male brackets in the chair base, slide the back down on t he base. See
Figure B Push down on the top of the back to lock the back into position. You will hear a click from each side of the chair to ensure the back
is locked in properly.
Figure C
6. If your model has back wings, align the male the female brackets and slide the wing down into place, See Figure C. Please Note there is a
label on the brackets. Please assemble them as 1-1 and 2-2.
Figure D
SIGNATURE DESIGN BY ASHLEY ® All Rights Reserved. December, 2017 00172A Page 4 of 26