Sauder Dresser 416350 Instructions De Montage page 15

Step 11
Push four DRAWER FRONT BRACKETS (30G) into the
å
holes in the LARGE DRAWER SIDES (D486).
Fasten the DRAWER FRONT BRACKETS (30G) to the
å
LARGE DRAWER SIDES (D486). Use eight BLACK 1/2"
FLAT HEAD SCREWS (11S).
Fasten the LARGE DRAWER FRONT (J) to the LARGE
å
DRAWER SIDES (D486). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
Fasten a PULL (45K) to the LARGE DRAWER FRONT (J).
å
Use two SILVER 7/8" MACHINE SCREWS (24S).
Repeat this step for the other drawers using the SMALL
å
DRAWER FRONT (N). The small drawer will only
use two DRAWER FRONT BRACKETS (30G).
www.sauder.com/services
D486
J
24S
SILVER 7/8" MACHINE SCREW
(6 used for the PULLS)
BLACK 9/16" LARGE HEAD SCREW
(10 used for the DRAWER FRONT BRACKETS)
30G
D486
J
45K
416350
1S
(10 used)
30G
BLACK 1/2" FLAT HEAD SCREW
(20 used in this step)
11S
Page 15