Fitting And Removing Your Baby From The Simplicity Infant Carrier - Silver Cross Simplicity Mode D'emploi

A
9
10
A B
11
10
B
C
C
D
Fitting and removing your baby
from the Simplicity Infant Carrier
Operating the harness
Your child must be fastened
in the safety harness at all
times when using the Simplicity
Infant Carrier.
9
Place the Simplicity on a level fl oor
surface and the handle in the
stable position.
Slacken the shoulder straps by
pressing the harness release button
(A) and at the same time, pulling
both shoulder straps forward below
the chest pads with your other hand (B).
Unfasten the harness by pressing
the red release button (C)
10
Place the shoulder straps over the
sides of the infant carrier.
Place your baby in the Simplicity
Infant Carrier and check that the
shoulder straps are in the correct
position for your baby's shoulders
5
(see point p.8). Correctly position
the 5 point harness over the child
making sure there are no twists.
11
Fit the shoulder strap tongues (A)
and (B) together and then push
fi rmly into the crotch strap buckle
(C) until you hear a click.