Harness Adjustment - Silver Cross Simplicity Mode D'emploi

A
6
7
8
B
C

Harness adjustment

Place the Simplicity Infant Carrier on
a level fl oor surface with the handle
in the stable position.
6
Slacken the shoulder straps by
pressing the harness release button
(A) at the same time, pulling
shoulder straps forward below the
chest pads with your other hand (B).
Press the red release button (C) and
undo the harness.
Carefully place your baby in the
Simplicity Infant Carrier and identify
the correct shoulder position.
7
Open the instruction manual
compartment at the rear of the
infant carrier shell and locate the
adjustment handle.
8
Release the handle and adjust the
shoulder straps to the required
position. Push the handle back into
the new position and make sure it
clicks correctly into the notched
groove. Close the instruction manual
compartment lid. The inner head
support will have altered position so
that it corresponds with the new
harness shoulder position.
Check that the shoulder straps
are in the correct position for
your baby's shoulders.
both
9