Publicité

Liens rapides

MODEL/MODELO/MODÈLE
Register Online
Regístrese en línea
S'enregistrer en ligne
www.deltafaucet.com/registerme
To reference replacement parts and access additional
technical documents and product info, visit
www.deltafaucet.com
Para referencia sobre las piezas de repuesto y acceder a
documentos técnicos adicionales e información del producto,
visite www.deltafaucet.com
Pour obtenir la référence des pièces de rechange ainsi
que pour avoir accès à d'autres documents techniques et
renseignements sur le produit, allez à www.deltafaucet.com
?
1-800-345-DELTA (3358)
customerservice@deltafaucet.com
Read all instructions prior to installation.
CAUTION
!
Failure to read these instructions prior to installation may result in personal
injury or property damage. Manufacturer assumes no responsibility for
product failure due to improper installation.
Lea todas las instrucciones antes de hacer la instalación.
ADVERTENCIA
!
El no leer estas instrucciones de instalación puede resultar en lesiones
personales o daños a la propiedad. El fabricante no asume ninguna
responsabilidad por la falla del producto debido a una instalación incorrecta.
Veuillez lire toutes les instructions avant l'installation.
CAUTION
!
L'omission de lire les présentes instructions avant l'installation peut
entraîner des blessures ou des dommages matériels. Le fabricant se
dégage de toute responsabilité à l'égard d'un bris du produit causé par une
mauvaise installation.
You may need:
Usted puede necesitar:
Articles dont vous pouvez avoir besoin :
1/8"
TWO HANDLE WIDESPREAD
106351
BATHROOM FAUCETS
LLAVES DE AGUA/GRIFOS
PARA BAÑOS DE DOS MANIJAS
SEPARADAS
ROBINET DE LAVABO À GRAND
ENTRAXE À DEUX MANETTES
Image is for reference only.
La imagen es sólo para referencia.
L'image est fournie à titre indicatif seulement.
1
02/06/2020
Rev. B

Publicité

Table des Matières
loading

Sommaire des Matières pour Delta STRYKE 357766-MPU-DST

  • Page 1 Pour obtenir la référence des pièces de rechange ainsi que pour avoir accès à d’autres documents techniques et renseignements sur le produit, allez à www.deltafaucet.com 1-800-345-DELTA (3358) customerservice@deltafaucet.com Read all instructions prior to installation. CAUTION Failure to read these instructions prior to installation may result in personal injury or property damage.
  • Page 2: Cleaning And Care

    Cleaning And Care Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, sim- ply wipe gently with a damp cloth and blot dry with a soft towel. Limpieza Y Cuidado De Su Llave Tenga cuidado al ir a limpiar este producto.
  • Page 3 Slide end valves (2) gaskets (3) and bushings (4) into sink. Note: If sink is uneven, use silicone under the handle base (1). Bushings will not be required with holes smaller than 1 3/8" diameter, but should be used with holes larger than 1 3/8" diameter to properly center and seal the valves to the sink. Note: Valve with hot label should be installed in the left hole for proper handle rotation.
  • Page 4 SPOUT INSTALLATION / INSTALACIÓN DEL SURTIDOR / INSTALLATION DU BEC Your install will be one of the steps below. Su instalación se encuentra en uno de los siguientes pasos. Votre installation est décrite dans l’une des étapes ci-dessous. Install the spout (1), gasket (2) and bushing (3). Bushings will not be required with holes smaller than 1 3/8” diameter, but should be used with holes larger than 1 3/8”...
  • Page 5: Problèmes Possibles Et Solutions

    When cutting the PEX tubing the installer accepts the responsibility to do so in a way that allows a leak- free joint to be created. Delta is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint.
  • Page 6 The tube must be cut straight. When cutting the PEX tubing the installer accepts the responsibility to do so in a way that allows a leak-free joint to be created. Delta is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint.
  • Page 7 Do not use pipe dope or other so in a way that allows a leak-free joint to be created. Delta is Potential Problems and Remedies sealants on water line connections.
  • Page 8 Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve NOTICE Ensure cut is straight. upside down. Failure to use plastic sleeve (ferrule) in the correct orientation will result in disconnection and possible water damage. No instale la manga Asegúrese que el corte 1.
  • Page 9: Renvoi Mécanique En Métal

    Metal Pop-Up Ensure the lift rod slider (5) is pulled all the Pivot (1) must face faucet. Pull assembly (2) Remove stopper (1) and flange (2). way up and stopper (6) is pushed all the way down firmly and hold in place. DO NOT TWIST. Screw nut (1) all the way down.
  • Page 10: Renvoi Mécanique En Plastique

    Remove aerator (1) using supplied wrench (2) and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts.
  • Page 11 Correct End Valve Orientation La Orientación de la Válvula Extrema Bonne configuration de la soupape Hot/Caliente/Chaude Cold/Fría/Froide Open/Abrir/Ouvert Valves shown in closed position. Las válvulas en la posición cerrada. Soupapes montrées en position fermée. Maintenance B. SHUT OFF WATER SUPPLY VALVES. Replace valve assembly (7).* When If faucet exhibits very low flow: reinstalling parts, make sure bonnet nut (8) is tightened securely with a A.
  • Page 12 STRUCTIONS. Notice to residents of the State of New Jersey: The provisions of this warranty, including its limitations, replacement parts may be obtained by calling 1 800 345 DELTA (3358) or by contacting us by mail or online as follows are intended to apply to the fullest extent permitted by the laws of the State of New Jersey.

Ce manuel est également adapté pour:

Dorval 3556-czmpu-dstDorval 3557-czmpu-dst

Table des Matières