Westfalia 87 84 76 Mode D'emploi page 14

holes. Failure to follow these instructions may cause overheat-
ing or fire.
 Allow batteries to cool for 15 minutes after charging or heavy
use. Failure to follow these instructions may cause overheating
or fire.
 Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack. Only
use Li-Ion batteries provided with a product or specifically
designed to be compatible.
 Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
 If the connection cable of the charger is damaged, it must be
replaced by the manufacturer, an authorised service workshop
or a specialist before using it again.
 The unit is designed for operation in altitudes of up to 2000 m
above sea level.
 Keep the battery out of reach of children.
 When not in use batteries should be stored at room tempera-
ture (approximately 20˚ C).
 Do not open, disassemble, crush, heat above 60° C or
incinerate. Do not dispose of in fire or similar.
 When battery pack is not in use, keep it away from paper clips,
coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Liquid may leak from the battery if used incorrectly. Avoid
contact with it. In case of accidental contact, rinse with water. If
liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
 Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Safety Notes
10