Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Install hitch- (b) Raise hitch into position. Slide wires and bolts through mounting holes of the hitch and remove pull wire, loosely secure conical
washer ③ and 7/16" nuts ④, see Figure 1
4. Tighten all 7/16'' fasteners with torque wrench to 50 Lb.-
Ft. (68 N*M).
©2022 Horizon Global™ Corp - Printed in Mexico
Proper torque is needed to keep the hitch
secure to the vehicle when towing.
5. Re-attach exhaust and re-insert rubber plugs in access holes
Sheet 7 of 21
76599NP
.
04-25-22
Rev. A
Publicité
Table des Matières
