Tv + Dvd + Vcr - RCA TOCOM 1616332A Manuel D'utilisation

Connections & Setup
www.DataSheet4U.com
www.DataSheet4U.com
VCR
VIDEO AUDIO
OUT
R L
IN
R L

TV + DVD + VCR

1. Connect your DVD Player to your TV.
A. Connect the audio (white and red) cables to the R and L/MONO AUDIO jacks on the back of the TV and
to the Audio Output jacks on the DVD player.
B. If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and to the S-VIDEO IN jack on the back of the TV. If your DVD player doesn't have an
S-Video jack, go to C.
C. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO jack on
the back of the TV.
2. Connect your TV to your VCR.
Connect a coaxial cable to the TV ANT jack on your TV and to the Output Jack on your VCR (sometimes
labeled OUT TO TV).
3. Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.
4
Graphics contained within this publication are for representation only.
TV (back panel)
OUT TO TV
CH3
CH4
2
IN FROM ANT
3
From Cable
or Antenna
-OR-
TV ANT
L/MONO
R
AUDIO VIDEO
1C
1A
DVD
1B
OUT
R L VIDEO
S-VIDEO
S-VIDEO IN
Go to page 7
Chapter 1