Horizon Global 76176 Instructions D'installation page 4

1. Remove Excess Caulk- Remove excess caulk from the frame rails in
the hitch installation area.
2. Enlarge access hole – Using a die grinder or other suitable tool,
enlarge the access hole enough for the carriage bolt head to fit through.
See figure 2
4. Remove screws - Using T15 torxbit remove (4) screws from bottom of fascia. This step is only for model years 2021-current.
©2022 Horizon Global™ Corp - Printed in Mexico
3. Install hardware - Using the fish wire install items 1 and 2 as shown in figure
1 through the access hole in the vehicle frame. Repeat for both sides. Note:
Keep the fish wire attached to the hardware.
Sheet 4 of 15 76176NP 03-04-22 Rev. B