Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Ironing without steam (C)
1.
Set the ON/OFF knob (16) to the
(= no steam).
2.
Select the recommended ironing temperature
using the temperature control (19) - (see step
3.
B, chapter "Temperature selection and steam
adjustment").
Ironing with steam (D)
1.
Make sure that the water level in the reservoir is
higher than 1/4.
2.
Set the ON/OFF knob in
3.
Select the recommended ironing temperatura by
using the temperature selector (19) (see step B,
chapter "Temperature selection")
4.
Press the steam button (14) to use the steam
ironing function. We recommend using the
steam button function when the temperature is
higher than.
Wait for the temperature indicator light to
turn off and for the Steam Ready indicator
light to turn on, before pressing the steam button.
Ironing with continuous steam (E)
The continuous steam function is useful to iron out
any persistent wrinkles through a uniform emission of
steam onto the fabrics.
1.
Make sure that the water level in the reservoir is
higher than 1/4.
2.
Select the recommended ironing temperature
using the temperature control (19) - see step B,
chapter "Temperature selection".
3.
Press the continuous steam button (13) and
activate the slider on the button in order to get
a continuous steam flow when ironing. We
recommend using the continuous steam button
when the temperature is higher than
Wait for the temperature indicator light to
turn off and for the Steam Ready indicator
light to turn on, before pressing the steam button.
FEATURES
Vertical steam function (F)
The vertical steam function is useful to iron out
wrinkles from hanging garments, curtains etc. To use
this function just place your iron in a vertical position.
All the functions of the steam generator will remain
unchanged in this position - refer to paragraph "Using
the appliance".
Do not direct steam towards people or
animals and do not iron garments while
worn.
position
position.
.
Eco function (G)
Your generator is equipped with an Eco function that
allows energy savings of energy and water compared
to normal consumption in terms of maximum steam
level. To start the Eco function set the ON/OFF knob
(16) to
.
Automatic switch-off function (H)
The automatic switch-off function ensures total safety.
This function automatically switches off the steam
generator when it is not used for a few minutes. In
particular, your steam generator will automatically
switch off after 10 minutes if it is left unused.
If you leave the steam generator unattended, a buzzer
will sound to inform you that the automatic switch-off
function is active. To restart it, just press the ON/OFF
button.
Wait for the Steam Ready indicator light to
turn on again and for the temperature
indicator light to turn off before start ironing
again.
CLEANING AND MAINTENANCE
After use (I)
1.
Disconnect the appliance plug from the electrical
socket and let the steam generator cool down.
2.
Empty the water reservoir (8).
3.
Wind the steam cable (11) and the power-supply
cord (10) around the special cord-rewinding clip
(9).
4.
Store the steam generator in a safe dry place.
5.
Let the steam generator cool down and store it in
a safe dry place.
.
Cleaning (J)
Never use aggressive and/or abrasive
products to clean the plastic parts and the
iron soleplate.
1.
Disconnect the appliance plug from the electrical
socket and let the steam generator cool down.
2.
Clean the plastic parts of the steam generator
with a soft damp cloth and dry.
3.
For routine cleaning and/or the removal of stains
or other residues deposited on the plate, use a
damp soft cloth and dry.
4.
Use a damp cotton tip to remove any scale in the
steam holes that may impair the performance of
your steam generator.
In order to keep the soleplate perfectly
smooth and polished, avoid any contact
with metal objects and do not iron sharp objects
it en
23
Publicité
Table des Matières
