Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT INSTALLATION
Before installation
Important
Please be advised that the provided T-valve
should be installed at the fill valve under the
toilet tank, and NOT at the cold water supply
coming from the wall.
Cold Water Supply
If you do not have access to the fill valve under
the toilet tank, contact Brondell Customer
INCORRECT
Service at 888.542.3355. We may be able to
provide alternative options.
Check water supply line
Check the water supply line that connects the
Fill Valve
toilet tank fill valve to the water shut-off valve at
the wall. If it is a rigid pipe, you will need to
purchase a flexible water supply hose to replace
CORRECT
it before installing the FreshSpa. The length
of the hose you purchase may vary, but the top
connection size should be ⅞" ballcock (to
connect to the T-valve that you will install under
the toilet tank), and the bottom connection will
be 3/8" or ½" female compression (to connect at
the shut-off valve at the wall).
5
Publicité
Table des Matières
