brondell FreshSpa FSP-150 Guide D'utilisation page 10

PRODUCT INSTALLATION
Installing the bidet attachment
7. Connect the bidet hose to the bidet attachment.
Connect open end of bidet hose to the connection
underneath the bidet attachment.
8. Turn on the water supply and check for leaks.
a. Open the main water supply valve slowly and
check for leaks.
b. Wait 5-10 minutes, check again and if there are
no leaks, continue.
Note: If there is any leaking, check all rubber washers and make sure all water
connections are tight and secure. If necessary, you can use the provided Teflon
tape (plumber's tape) for any leaking connections.
8
Step 7