Cleaning And Maintenance; Technical Data - camry Premium CR 8052 Mode D'emploi

20. Do not wash clothes that contain alcohol, petrol or organic solvents.
21. Do not pour water on the control panel with timer to avoid electric shock.
DESCRIPTION OF THE DEVICE
1. Water inlet opening
3. Washing chamber lid
5. Washing chamber
7. Water supply hose
9. Spin lid
11. Spin chamber
PREPARATION OF THE APPLIANCE
1. The washing machine should be placed on a stable and flat surface (the maximum permissible inclination angle is 2°, in other case
the washing machine should be moved to a different place). To avoid noise while operating, the distance between the washing machine
and the wall must be larger than 5cm.
WASHING
1. Before washing, check whether the drain hose (6 ) is in the top position to prevent water outflow . Hose ( 7) is used to connect the
water inlet opening (1) with a tap. Connect the hose to the water tap. Open the lid of the washing chamber (3). Empty pockets of
clothes. Insert the clothes to the washing chamber (5). Fill the washing machine with hot water with temperature of not more than 50 °
C to the upper limit of the scale. Water may also be poured by the machine lid (3). Add appropriate amount of washing powder. Close
the cover (3).
2. Connect the machine to a grounded power outlet. Set the selector knob (10) NORMAL (normal wash - longer washing cycles, for
larger clothes) or GENTLE (delicate wash - shorter washing cycles, for smaller clothes and delicate fabrics). Set the washing machine
timer (2) on the desired time by turning the knob to the right. W ashing starts. If you want to interrupt the program before the end of the
set time, turn the timer to the left to switch of f the machine and remove mains plug with dry hand.
3. After finish of washing let the dirty water leave the washing machine using drain hose (6) and putting it into drains or capacious
vessel. Switch programming knob (10 ) to the position DRAIN.
SPINING
1. The washed and rinsed clothes put into the spin chamber (9). Close the protective cover (8). Close the spin lid ( 9). Set the spin time
by turning the timer (4) to the right. Spinning can be stopped by turning the timer (4) to the left to position 0.

CLEANING AND MAINTENANCE

1.Disconnect the plug from the socket and leave the washing machine to cool.
2. Wipe the lids and the outside of the washing machine with a damp cloth or a sponge with a small amount of dishwashing liquid.
3. Do not clean with steel wool or caustic agents.
4. Wipe the inner part of the tub dry.

TECHNICAL DATA

Supply voltage: 220-240V ~ 50/60Hz
Washing power: 230W
Spin power: 135W
Washing capacity: 3kg
Spin capacity: 1kg
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2. Das Gerät ausschließlich an die Steckdose 220-240V ~50/60Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden.
3. Wegen Vorsichtsmaßnahmen, sollten keine weiteren Geräte an den gleichen Stromkreis
angeschlossen werden.
4.Falls sich Kinder in der Nähe befinden, sollte bei der Nutzung des Gerätes spezielle
Max:450W
Max:630W
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
2. Washing timer
4. Spin timer
6. Drain hose
8. Protective cover
10. Selector knob
DEUTSCH
4