Fulgor Milano FD6W24FI1 Instructions D'installation page 19

INSTALLATION INSTRUCTION
5. 2 1 . 2 . C o n n e t c
C o n n e t c n i g o t a
Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64")
(ref. A fi g. 5-08); alternatively, place the hose on the sink (ref. B fi g. 5-08) using
the supplied hose support (see fi g. 5-9), but taking care to avoid obstructions
or excessive curving. Make sure the hose cannot fall out. For this purpose,
the hose support is fi tted with a hole (ref. A fi g. 5-9) which can be used to fi x
it to the wall or the tap with a piece of string. The free end must lie at a height
ranging from of 30 to 100 cm (from of 1-7/32" to 3-59/64") (see fi g. 5-08)
and must never be immerged in water. If horizontal extension hoses with a
maximum length of 3m are used, position the drain hose at a maximum height
of 85 cm (3-11/32") above the fl oor.
A
n i g h t e d a r n i h o e s
d a r n i
B
A
min O4 cm
1-37/64"
Fig. 5-08
Fig. 5-9
EN
17