Parental Controls And V-Chip - RCA TOCOM 1616362B Guide D'utilisation

Set VCR1 Lets you set up the channel the TV tunes to when you press the
VCR1 button.
Set VCR2 Lets you set up the channel the TV tunes to when you press the
VCR2 button.
Set SAT/CABLE Lets you set up the channel the TV tunes to when you press
the SAT•CABLE button.
Set DVD Lets you set up the channel the TV tunes to when you press the DVD
button.
5. Press the right arrow button to select the choice that matches the way you
have the component connected to this TV, and press OK.
The choices and a brief explanation follow:
AUTO TUNING
Go Back
VID1 . . .
Set VCR1
VID1 . . .
Set VCR2
Set SAT/CABLE CH02 . . .
Set DVD CH03 . . .
CH03 or 04 Component is connected to the TV ANT jack on the back of the TV, and you
want the TV to tune to channel 3 or 4 when you press the corresponding button on the
remote. Reminder: make sure the component's Channel 3/4 switch is set to the appropriate
channel.
VID1 Component is connected to the VIDEO 1 VIDEO or S-VIDEO jack on the back of the
TV and you want the TV to tune to a video input channel when you press the
corresponding button.
VID2 Component is connected to the VIDEO 2 VIDEO or Y,Pb,Pr jacks on the back of the
TV and you want the TV to tune to a video or component video input channel when you
press the corresponding button.
VID3 Compatible component video source, such as a DVD player or digital TV converter
box, is connected to the VIDEO 3 Y,Pb,Pr jacks on the back of the TV and you want the TV
to tune to the component video input channel when you press the corresponding button.
FRNT (Front Video Input)
TV and you want the TV to tune to the front video input channel when you press the
corresponding button.

Parental Controls and V-Chip

The choices in the USA V-CHIP menu involve software inside your TV (referred to as V-Chip)
which allows you to block TV programs and movies based on violence, sex, or other content
you may believe children should not view.
Once you block programs, you can unblock programs by entering a password.
By default, the software inside your TV is turned "off." For instructions to turn on V-Chip,
go to page 21.
Chapter 3
Graphics contained within this publication are for representation only.
N/A Choose this if you don't have this particular
component connected to the TV, or if you don't want the TV
to automatically tune to the correct channel when you're
using this component.
CH02 (SAT/CABLE only) Component is connected to the TV
ANT jack on the back of the TV, and you want the TV to tune
to channel 2 when you press the SAT•CABLE button on the
remote. Reminder: make sure the component's Channel 2/3/4
switch is set to channel 2. Usually this switch is on the back
of the component.
Component is connected to the VIDEO jack on the front of the
Using the TV's Features
15