WANDERS Diamant Mode D'emploi Et Instructions D'installation page 27

A
Illustration 6 Remove cover plate (A) for
external air supply
Mounting the decorative tube
1. Check the package of the decorative tube. Do not mount the decorative tube if the package is damaged.
Notify WANDERS if anything is damaged.
2. Take the decorative tube and remove the front plate by pulling it upward and forward.
3. Level the decorative tube and screw it to the stove and, if necessary, to the wall.
4. Mount the flue gas tube overlappingly.
5. Mount the telescopic part to the ceiling and click the cover plate in place.
6. Remove the centre piece from the upper plate of the stove by unscrewing the four screws.
7. Replace the upper plate onto the stove.
Repairs
Replacing the glass in the door
• Open the door with the broken glass.
• Remove the glass strips on the inside of the door. (see
illustration 7)
• Replace the glass. Be careful, the glass may be
sharp!
• Check if the ceramic strip is undamaged and properly
fixed on the door.
If it isn't, stick it on again with neutral silicone paste
or replace it entirely.
• Replace the broken glass (Watch out for sharp
edges!).
• Reassemble everything.
Replacing the front glass
• Remove the upper plate and unscrew the two clips
(see illustration 8).
• Then take the arched front glass by moving it forward
and lowering it slightly. Be careful! The glass may be
sharp.
• Remove the glass strips (see illustration 9).
• Check if the ceramic glass strip is undamaged and still
fixed on the stove. If it isn't, stick it on again with
neutral silicone paste or replace it entirely.
• Replace the arched front glass. Watch out for sharp
edges!
• Assemble the stove.
Illustration 7 Removing the glass strips
27