Camp Chef FP40 Mode D'emploi page 3

NOTE: THIS ASSEMBLY IS EASIER USING TWO PEOPLE TO HELP HOLD THE PARTS.
INSTALL BACK PANEL AS SHOWN USING QTY 3 #10 SCREWS.
DO NOT TIGHTEN THE SCREWS ALL THE WAY AT THIS POINT.
0612-FP40-Instructions.indd 4-5
INSTALL SIDE PANEL AS SHOWN USING QTY 5 #10 SCREWS.
DO NOT TIGHTEN THE SCREWS ALL THE WAY AT THIS POINT.
STARTING WITH THE REAR PANEL MAKE SURE THE OUTSIDE SURFACES
OF THE PANELS ARE FLUSH WITH THE OUTSIDE PANELS OF THE BOTTOM ASSEMBLY
AND TIGHTEN THE SCREWS.
6/18/12 2:37 PM