Reverse Door - FAR R2248WDS Mode D'emploi

Make sure the door seal is clean and in good condition. It should hold a piece of paper tightly in place
when shut.
Defrost regularly or when ice is more than 5mm thick. Thick ice covering the inner sides signi cantly
increases energy use.
The combination of the drawers, baskets and shelves shown in the device description is optimal for
e cient energy savings. Changing the combination proposition could alter the e ciency.How often
the door is opened

Reverse door

Follow the following stages to reverse the door from its initial position.
DEPOSIT DOORS
1. Take away all hole covers and remove all the cover' s screws. Lift the top cover away from the Fridge.
GB
2. Remove the left hinge cover. Insert the right hinge cover.
Remove
3. Unscrew the screws and remove the upper hinge. Deposit the door of the refrigerating
compartment.
34
4. Remove the bolt with a screwdriver and ip the hinge bracket then reattach the bolt to the hinge
bracket. Remove the fridge door.
unscrew
5. a. Lift the top hinge cover on the fridge door and move it to the side you want to install.
b. Take o the middle hinge by removing the screws. Lift the freezer door up and move it away.
c. Remove the screws' cover and place them to the opposite side.
6. Then unscrew the front foot to remove the bottom hinge.
unscrew
screw
GB
unscrew
unscrew
35