HoMedics FMS-273H-CA Manuel D'instructions page 4

INSTRUCTIONS FOR USE
To reduce the risk of electric shock, this appliance is equipped with a polarized plug (one blade wider than
the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
1. Plug cord into a 120-volt outlet.
2. It is highly recommended that the foot massager be used with socked feet. Do not use the unit with
shoes.
3. Place massager on the floor in front of your chair or seat.
4. To activate the massage action, press the power p button once. The LED illuminator will glow blue.
TIP: By changing the pressure of your feet on the massager, it will change the feel of the massage. If
the unit tickles you, then you may need to apply more pressure or you may need to become accustomed
to the sensation. If the massage feels too strong, you may need to lighten the pressure of your feet on
the unit.
5. To activate the relaxing heat with the massage, press the power p button a second time. The LED
illuminator and all 6 shiatsu massage heads will glow red. Allow a few moments for the heating action
to warm up.
6. Press the power p button a third time to turn the massaging unit off.
NOTE: The relaxing heat will only function when the shiatsu massage is on.
CAUTION: To avoid injury and irreparable damage, always remain seated when using this foot
massager. Never stand on the unit.
4