SOUNDMASTER high line UR 8400 Mode D'emploi page 12

Action (during data adjustment):
- Press << / Tune - (3) button to adjust data backward.
- Press >> / Tune + (5) button to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto forward.
- Use AL1 / AL2 set button to confirm each setting.
ALARM
another 9 minutes later the alarm will ring again and so on until the next alarm
rings.
Note: The interval time of the Snooze function is 9 minutes.
- If you want to disable the SNOOZE function and stop alarm completely,
press Radio ON/OFF button (7). If you don't press any button, the alarm will
ring during 30 minutes & stop automatically.
- Icon of AL1 and AL2 will blink as long as Snooze function is still operating.
Once Snooze is turned off icon of AL1 / AL2 stop blinking and lights on the
display.
DISPLAY LIGHT ON/OFF FUNCTION
- Press MEM. Set / M+ / display light auto on-off /NAP button (6) for 3
seconds, the LED display indicator will light on, the LED display will turn off
after 15 seconds automatically.
Press any button to maintain the LED display for 15 seconds.
- Press MEM. Set / M+ / display light auto on-off /NAP (6) button for 3
seconds, the LED display indicator will light off to cancel this function.
AUTO CHANGE DISPLAY CONTENT
In radio off mode, press the VOLUME UP / DISPLAY AUTO CHANGE
ON/OFF (2) button and keep depressed over 2 seconds to enter time AUTO
CHANGE DISPLAY mode ( "ON" will appear on the display).
the Year will be displayed and press again to display Month/Day, the display
UR8400 / English Instruction Manual
will be suspended again,