POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit is equipped
with a battery back up system, it requires a 3V CR2032 flat lithium battery (not
included). Insert the battery in the battery compartment, making certain that
the positive and negative (+ and -) battery terminals are attached to the
corresponding terminals on the plate in the battery compartment. If an AC
power failure occurs, the clock automatically switches to the battery power
supply, the clock and timer memory continue running. When the AC power
resumes, the clock switches back to AC again.
TIME AND CALENDAR MANUAL SETTING
Setting Time and Calendar
Press Clock ADJ. (13) button in standby mode and keep depress over 2
seconds to enter time set mode, after enter the setting mode, press Clock ADJ.
button (13) to change the mode cycle as follows :
Normal
Year
Month
time Min
Normal
Action (during data adjustment):
-
Press << / Tune - button (3) to adjust data backward.
-
Press >> / Tune + button (5) to adjust data forward.
-
Keep depressed << or >> button for 2 seconds to enable auto forward.
-
Use Clock ADJ. (13) button to confirm each setting.
ALARM SETTING
Setting Alarm 1 and Alarm 2
In standby mode, press the AL1 (15) or AL 2 (14) button once to preview the
alarm time.The alarm time is displayed, press & hold the AL1 / AL2 buttons for
3 seconds and the hours will blink. Press AL1 / AL2 button (15/14) and keep
depress over 2 seconds to enter alarm set mode. Once in the setting mode,
press alarm set button (15/14) to change the mode cycle as follows:
Normal
AL 1 Hour
AL 1 Min
AL 1 wake radio
AL 1 wake radio volume
Normal
AL 2 Hour
AL 2 Min
AL 2 wake radio
AL 2 wake radio volume
Select alarm weekday mode as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week
UR8400 / English Instruction Manual
Day
12/24 H format
AL 1 weekday Alarm
Normal.
AL 2 weekday Alarm
Normal.
Real time Hour
Real
AL 1 wake beep
AL 2 wake beep