Publicité
INSTALLATION: A
(continued)
STEP 3: Peel off the yellow sticker and paste it
on the round area of the bottom plate.
STEP 4: Fix the bottom plate on the round plate.
STEP 5: Connect the wire with power input line
by 3 connectors, refer to wiring diagram.
(L = Black, N = White, G = Yellow/Green).
STEP 6: Reconnect the fixture and tighten
with the screws.
INSTALLATION: B
STEP 1: Turn off power before installation,
then loosen the 4 screws on the fixture and
remove the bottom plate.
STEP 2: Paste the black sponge pad on the
bottom plate.
STEP 3: Screw the bottom plate on the wall.
STEP 4: Remove one of the 1/2 end cap and
thread through the wire.
STEP 5: Connect the wire with power input line
by 3 connectors, refer to wiring diagram.
(L = Black, N = White, G = Yellow/Green).
STEP 6: Reconnect the fixture and tighten
with the screws.
WIRING DIAGRAM
L = Black
N = White
G = Yellow/Green
DIM +
DIM –
(Dimming wire not
needed to connect)
3
1
3
Light Fixture
5
5
2
4
2
4
Publicité
